Kawi2strokes.com Forum

I can repair those stripped out threads in the oil pumps with heli coils. Stripped threads will drilled out, tapped and inserts professionally installed. I'm a machinist with over 30 years in the trade and have installed literally thousands of helicoils.

Oil pump will have the outer ends disassembled. I do not remove the drive or the center section.


Drilled and tapped on my milling machine. ( insuring the threads stay square to the bosses to reduce the chance of leakage)


Chips cleaned out so there is no debris in the pump.


Oil pump reassembled


$25 first stripped hole, $8 each additional stripped hole.

Contact me at JRDerstine AT gmail DOT com

Thanks
Jeff

Made a drilling fixture to keep the holes perfectly square. It's used upright as shown for the inlet and laid down for the outlet holes.

I'll be getting a hold of you this winter. I have one stripped, but using sealer looks like it will get me through the summer.

Just let me know when you're reading for the repair. I'll send my contact info.

Thanks
Jeff

Just had an inquiry asking if I was till doing repairs. Yes I am and the prices are still the same as 2012.

Thanks
Jeff

Thanks Jeff for the excellent oil pump repair service.

Jeff went out of his way to source an "o" ring needed for my pump. Very much appreciated.

Quick quality service it is a pleasure to do business with you.

Thanks again for all your help.

Greg

PS: I'll be sending you my gear shift and kick start to be sleeved this winter.