I have my set of cracked up Toomeys that are in need of repair that I can bring
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| should we bring the welder? you decide http://kawi2strokes.com/forum/viewtopic.php?f=35&t=13267 |
Page 1 of 2 |
| Author: | m in sc [ Fri Feb 02, 2018 3:34 pm ] |
| Post subject: | should we bring the welder? you decide |
This year, David offered to bring up the tig machine incase anybody needs work done. aluminum or steel, etc. can even do back purging on pipes and the such... keep in mind, he is a fabricator by trade and has done some of the best work i've ever personally seen. Gauging interest, if enough we'l haul it up. we will be there all week long. |
|
| Author: | Retro 3 [ Fri Feb 02, 2018 10:33 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
That's a great offer! That brings the meet up a few notches. This will be an interesting thread to watch. |
|
| Author: | Tim Steele [ Fri Feb 02, 2018 11:46 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
I have my set of cracked up Toomeys that are in need of repair that I can bring
|
|
| Author: | m in sc [ Sat Feb 03, 2018 12:38 am ] |
| Post subject: | Re: should we bring the welder? you decide |
this stuff, exactly. figure we can offset the cost of the meet a bit for david. we"ll bring some basic stuff, he really wants to help out but im sure he'd appreciate a bit of scratch for his time as well. when i got the 4130 frame from danny, one condition from danny was that the ONLY person allowed to weld on it was David. 
|
|
| Author: | evansje1 [ Sat Feb 03, 2018 9:19 am ] |
| Post subject: | Re: should we bring the welder? you decide |
Is his welder portable or will it need a power source? |
|
| Author: | m in sc [ Sat Feb 03, 2018 11:58 am ] |
| Post subject: | Re: should we bring the welder? you decide |
can run on 110 or 220 (ie we can use the stove plug) |
|
| Author: | rdcharlie [ Tue Feb 06, 2018 5:41 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
Let me know what you need electrically....Im in the electrical union since 1997...of course this wont be a union job. What goes on at the Gap stays at the Gap.... Charlie |
|
| Author: | anotherusername [ Tue Feb 06, 2018 8:44 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
Excellent idea, see if he can bring a little spare aluminum, I'd love to take advantage of his mad skills and have him weld up something like this. .....maybe a little bigger with a slide, board and zip line. |
|
| Author: | rdcharlie [ Tue Feb 06, 2018 11:40 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
I can install some Pagoda lights and run power to the davits that lift the boat. As for the poles I can call on a few of girly friends that like to show off their acrobatic skills on poles.. Amber, Cinnamon and Shaniqua are ready!
|
|
| Author: | m in sc [ Wed Feb 07, 2018 1:55 pm ] |
| Post subject: | Re: should we bring the welder? you decide |
rdcharlie wrote: Let me know what you need electrically....Im in the electrical union since 1997...of course this wont be a union job. What goes on at the Gap stays at the Gap.... Charlie oh we got it covered i think. 
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|