| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| WTB 74 H2 cylinders http://kawi2strokes.com/forum/viewtopic.php?f=26&t=14906 |
Page 1 of 1 |
| Author: | Never2Old [ Wed Aug 09, 2023 8:32 pm ] |
| Post subject: | WTB 74 H2 cylinders |
Looking for a set of cylinders for an H2B. I have some, had new pistons fitted, but there was a problem with them so I have to find a new set. I will have them bored and the new pistons fitted. Pistons are 72.5 mm, so anything I can have bored to fit them will work. Dave |
|
| Author: | Jim [ Thu Aug 10, 2023 7:38 am ] |
| Post subject: | Re: WTB 74 H2 cylinders |
You may find that if you measure your existing cylinders and their ports, you can use them along with either a spacer at the top or bottom, depending of whether you want stock porting or non-stock porting. |
|
| Author: | Never2Old [ Wed Aug 16, 2023 8:35 pm ] |
| Post subject: | Re: WTB 74 H2 cylinders |
After much searching and advice I'm going to work with what I've got. Going to be interesting. Thanks Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|