Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
Need Specialty Clutch Parts http://kawi2strokes.com/forum/viewtopic.php?f=26&t=14895 |
Page 1 of 1 |
Author: | Fireman [ Wed Jul 19, 2023 9:52 am ] |
Post subject: | Need Specialty Clutch Parts |
Does anyone have contact info. for Ralf Schipmann? Looking for a lock-up clutch for one of my H2s. Thanks Cope |
Author: | Jim [ Wed Jul 19, 2023 10:28 am ] |
Post subject: | Re: Need Specialty Clutch Parts |
He has an email link in the "Specialty/Misc" section of the vendor lists on the resource site. |
Author: | Fireman [ Thu Jul 20, 2023 11:36 am ] |
Post subject: | Re: Need Specialty Clutch Parts |
Thank you Sir, I'm trying to find a clutch, that i can use a stock cover with. I have a Magnason blower on one of my H2s and drive it with the right side of the crank, and the belt goes across the clutch cover to the blower snout. I just finished a 15 piece clutch and trying to convince a company to make me a hydraulic actuator. If that doesn't work, i'll try something else. Thanks Again |
Author: | Jim [ Thu Jul 20, 2023 12:48 pm ] |
Post subject: | Re: Need Specialty Clutch Parts |
One of the guys on the Canadian triples board has made several batches of hydraulic actuators and sells them reasonably. I made my own back in the late '70s. It's really just a 7/8" cylinder with a brake cup seal, and a piston that bears on the actuator rod directly. |
Author: | mraxl [ Fri Jul 21, 2023 10:10 am ] |
Post subject: | Re: Need Specialty Clutch Parts |
https://triplescanada.proboards.com/thr ... lic-clutch |
Author: | Fireman [ Mon Jul 24, 2023 10:39 am ] |
Post subject: | Re: Need Specialty Clutch Parts |
Thanks, Guess i'm not supposed to still be playing with these bikes 50 years after i built them LOL Contacted the site you said and pretty sure i could have broken into the White House easier than that free forum! Being located in Lexington, i've seen my share of Horse Crap, but nothing like they expect you to jump through. Thanks Anyway for Info. Cope |
Author: | mraxl [ Fri Jul 28, 2023 11:13 am ] |
Post subject: | Re: Need Specialty Clutch Parts |
Here is the guy (email) you can contact to get Hyd clutch as described on Canadian board: ianandpambudge@gmail.com |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |