Kawi2strokes.com Forum

Does anyone have contact info. for Ralf Schipmann? Looking for
a lock-up clutch for one of my H2s.

Thanks
Cope

He has an email link in the "Specialty/Misc" section of the vendor lists on the resource site.

_________________
If it surges, that's normal, upshift.

Thank you Sir,
I'm trying to find a clutch, that i can use a stock cover with. I have a
Magnason blower on one of my H2s and drive it with the right
side of the crank, and the belt goes across the clutch cover to the
blower snout.
I just finished a 15 piece clutch and trying to convince a company
to make me a hydraulic actuator. If that doesn't work, i'll try something else.

Thanks Again

One of the guys on the Canadian triples board has made several batches of hydraulic actuators and sells them reasonably. I made my own back in the late '70s. It's really just a 7/8" cylinder with a brake cup seal, and a piston that bears on the actuator rod directly.

_________________
If it surges, that's normal, upshift.

_________________
Answers are here: http://kawatriple.com/

Thanks,
Guess i'm not supposed to still be playing with
these bikes 50 years after i built them LOL
Contacted the site you said and pretty sure
i could have broken into the White House easier
than that free forum! Being located in Lexington,
i've seen my share of Horse Crap, but nothing
like they expect you to jump through.

Thanks Anyway for Info.
Cope

Here is the guy (email) you can contact to get Hyd clutch as described on Canadian board:
ianandpambudge@gmail.com

_________________
Answers are here: http://kawatriple.com/