Kawi2strokes.com Forum
http://kawi2strokes.com/forum/

BBPs Top End
http://kawi2strokes.com/forum/viewtopic.php?f=25&t=9223
Page 1 of 2

Author:  Tim Steele [ Sat Sep 27, 2014 8:32 pm ]
Post subject:  BBPs Top End

Center Head: 1st pass complete
Image
From the end:
Image
Intake port :
Image
From the top:
Image
Inside:
Image
Outside:
Image
This is the first pass looks like a model car. I'll cut the pressure back and get the satin finish on the next pass...

Author:  BBP [ Mon Sep 29, 2014 1:22 pm ]
Post subject:  Re: BBPs Top End

Tim

Those look really great !........awesome first class job........recommend Tim Steel on your blasting projects for sure :thumbup:

Just got the engine cases put together, new Charlies crank and R&D transmission and it's in the bike now, gonna be pretty.......won't want to get grease or dirt on it now :lol:

THX Phil

Author:  Tim Steele [ Mon Sep 29, 2014 5:20 pm ]
Post subject:  Re: BBPs Top End

I use a good shop rag soaked in carb cleaner to keep that just bead blasted look on heads, cylinders and cases.Greasy fingerprints will wipe right off.

Author:  BarryB [ Mon Sep 29, 2014 9:10 pm ]
Post subject:  Re: BBPs Top End

Wow Timster - awesomeness.

Author:  Tim Steele [ Tue Sep 30, 2014 11:41 am ]
Post subject:  Re: BBPs Top End

part number 3 head before
Image
Image
More progress: part number 3 cylinder done
Image
[url=http://s148.photobucket.com/user/triplepix/media/
IMG_20140930_120013_025_zps6246e161.jpg.html]Image[/url]

Author:  Tim Steele [ Tue Sep 30, 2014 7:49 pm ]
Post subject:  Re: BBPs Top End

ImageA better shot:

Author:  BBP [ Thu Oct 02, 2014 9:37 am ]
Post subject:  Re: BBPs Top End

Tim

Those Cylinders and Heads are sure going to look good on top of my fresh motor, I just got it put together last weekend :!: .....Got the Charlie Crank with Labs and KOYO's.......Mark at R&D undercut and modified transmission and new KOYO bearings.......Redline clutch parts in it :D

THX Phil
Image

Author:  Tim Steele [ Thu Oct 02, 2014 10:08 am ]
Post subject:  Re: BBPs Top End

Righteous!!!Looks GREAT !!!!!
It will be 1st of the week before I can get back on it. Raining again today and I leave for a red eye run to FL to fetch the Bridal Unit tomorrow. Fly out at 0525 and land at 1407, then 15 hours back in the car. You should have the parts in your hands by end of next week.

Author:  BBP [ Thu Oct 02, 2014 12:32 pm ]
Post subject:  Re: BBPs Top End

Tim

That will work just fine :) ........I have some new telephone system programming I need to study on anyways :? ........Gonna look nice !.....till it gets greasy :lol:

THX Phil

Author:  Tim Steele [ Wed Oct 08, 2014 3:23 pm ]
Post subject:  Re: BBPs Top End

Exhaust ports poished to the 378 HP spec: :e11 :e11 :e11
Image

DONE :D :D :D Image
The topend is winging it's way back to Phil and should be there Friday. Thanks for the business !!!

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/