| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Reproduction Denco Chambers - S2, H1, H2 Available So Far http://kawi2strokes.com/forum/viewtopic.php?f=25&t=7270 |
Page 6 of 6 |
| Author: | Jim [ Wed Dec 28, 2016 10:23 am ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
Notice that the curve upward of Cody's is more uniform than the ones on the yellow bike. The yellow one abruptly angles up at the front of the center section. I wonder how many sets were modified to curve upward after Denco sold them. |
|
| Author: | saint barry [ Wed Dec 28, 2016 12:54 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
If someone modified Cody's Denco H1 pipes with the upswing,they did a good job !!! They look nice !!! |
|
| Author: | Jim [ Wed Dec 28, 2016 1:01 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
Agreed about the nice job. I know exactly nothing about Denco roadrace pipes, other than I've heard people say they exist. From the photos in this thread, I'm pretty sure at least some are modified street pipes. |
|
| Author: | Ja-Moo [ Wed Dec 28, 2016 2:20 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
No RR pipes from Denco, at least for production. I think Tony said he had a personal set though. |
|
| Author: | kawi3cyl [ Wed Dec 28, 2016 4:42 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
I would guess  that if Jim were to ever produce any of the current offerings in the upswept design, that they would sell nicely. I would further guess that the same would hold true (maybe to a lessor degree since that would mean less of these beautiful pipes would be visible to the eye, and therefore could not be admired quite as much) if Jim were to reconfigure these chambers to be center swept and afford our bikes more aggressive lean angles.  Jim...? |
|
| Author: | Jim [ Wed Dec 28, 2016 5:20 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2 Available, Others to Fo |
Yes Darrin, what can I do for you? 
|
|
| Author: | Jim [ Wed Jan 11, 2017 12:33 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2, H1, H2 Available So Fa |
We're shipping H2 Denco Reproductions now. So far we have: S1/S2 (Denco sold the same chambers for both) Late H1 H2 Early H1 will be coming along shortly, followed by S3. All are available in mild steel for $695 and 304 stainless for $1095. All chambers are shipped "as welded", and shipping is actual cost. You can contact me at the email address in my avatar. |
|
| Author: | kawi3cyl [ Wed Jan 11, 2017 7:44 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2, H1, H2 Available So Fa |
Jim, are there any differences between early and late H1 other than the addition of the added L&R mounting extensions for the late models? |
|
| Author: | Jim [ Wed Jan 11, 2017 8:09 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2, H1, H2 Available So Fa |
No, the hangers are the only difference. Denco supplied all H1 chambers to fit the early H1s, and provided instructions for using extension links and spacers for the later H1s. I made a version of Denco H1 chambers that fit late H1s directly, for a cleaner installation. You can see what I mean in the instruction sheet: 
|
|
| Author: | Mach IV [ Sun Feb 19, 2023 4:28 pm ] |
| Post subject: | Re: Reproduction Denco Chambers - S2, H1, H2 Available So Fa |
Anything for the A1R/A1 or A7R/A7 ? Or suggestions,all I find are UK pipe builders and the exchange rate and shipping are a deal killer. |
|
| Page 6 of 6 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|