| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| New Lakeland Early H1 CDI unit http://kawi2strokes.com/forum/viewtopic.php?f=25&t=4848 |
Page 1 of 2 |
| Author: | Jim [ Sun Nov 04, 2012 6:45 pm ] |
| Post subject: | New Lakeland Early H1 CDI unit |
I now have a plug-and-play 12V CDI unit designed for '69-'71 H1s. It's $229 plus actual cost shipping, which should be around $10 in the US, $13 to Canada, and around $20 or a bit less overseas. You can read about it here: http://www.lakeserv.net/kaw/early_h1_cdi/ 
|
|
| Author: | kawi3cyl [ Sun Nov 04, 2012 7:00 pm ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
Jim, are you related at all to Albert Einstein? As I've commented in the recent past, your skills are invaluable to all of us 2-stroke fossil hunter/gatherer/riders. Thank you for your continued quest to help us keep our vtg bikes up and running! But on the flip side, you're putting a periodic drain on my wallet - time to start saving for yet another of your creations...  Hey! Now we've got a place to keep a small tool kit under the seat! 
|
|
| Author: | Tim Steele [ Sun Nov 04, 2012 11:40 pm ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
YOU are the MAN!!! |
|
| Author: | husson73 [ Mon Nov 05, 2012 3:53 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
|
|
| Author: | Sverre [ Mon Nov 05, 2012 4:36 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
| Just remembered that i forgot to answer your email. |
|
| Author: | starfire [ Mon Nov 05, 2012 6:11 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
Just a with a little help from Starfire though Jim. Very nice job too. Good luck!! |
|
| Author: | 1971Kaw500 [ Mon Nov 05, 2012 6:53 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
Cool! Maybe now I relax a LITTLE over 40 yr old electronics. |
|
| Author: | Jim [ Mon Nov 05, 2012 8:30 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
starfire wrote: Just a with a little help from Starfire though Jim. Very nice job too. Good luck!! You did give me the incentive to resume the development I started in 2009 when you announced that you were getting out of the business. The circuitry is quite different from yours, however, so I can't give you credit for that. I do thank Frank for supplying the early H1 alternator that I used to get the timing correct and do the almost real-world testing, and Mraxl for his usual tireless support. Also Tom V. and Scott for their expert help with testing. |
|
| Author: | starfire [ Mon Nov 05, 2012 8:44 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
Yes its a clever circuit design, and if you have the transformer "foldback" correct, they will run well. Its is an odd coincidence the kit you purchased a few months prior sped your development on this. However, good luck with it, I did say it was worth investing in and you have ran with it as I knew you would. You should consider too the hall effects to eliminate those dodgy pickup coils. I can help here as well. Its not hard to acknowledge the source of the design, after all, it is fair to do that, as you do with your other copies. |
|
| Author: | III [ Mon Nov 05, 2012 9:27 am ] |
| Post subject: | Re: New Lakeland Early H1 CDI unit |
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|