Kawi2strokes.com Forum

My 73 H2 is coming along. Thought some might like it so.......

Jim's CDI
Spec II pipes (ceramic coated)
Old porting by PHR
Sun rims
Tarozzi rearsets
Alum rearset bracket by me
EX500 caliper
Original 1973 Texas plate

Waiting on a set of Higgspeed pipes and a 14 tooth sprocket

Hope ya'll enjoy the pic

you're rearset are really on the rear

They are 5" in front of the original rear peg position and same height as rear peg. Almost the same rear location as the Raask except about an inch higher. I also moved the rear pegs straight back 2"

I like the stance, looks like it's already in motion. Did you bend the kicker to clear the right chamber?

Bent it to clear the brake pedal.

I just went back and looked. You helped me with location on the KTOG board by posting a pic of your Raask rearsets. Your H2 is what I used to determine the rearward location. The pic may be deceiving as the peg is a little higher than yours.

Thanks again for the help.

Trilogymac

you're right after I look at the pictures I have; before thought Raask was really front compare to yours, weren't

set up very similar to my H2, can't wait to see it with the new pipes.

I saw "Jiffy pop" and that prompted me to post mine. Will update when the pipes arrive.

Best,
Trilogymac

Trilogymac,

I have been digging through older posts looking for some good looking wheels on stock-ish hubs. You did it right with your setup. what sizes are your rims and are your hubs stock? How does it handle? thanks for your time and great looking bike.