| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| My H1A and H1B http://kawi2strokes.com/forum/viewtopic.php?f=22&t=11424 |
Page 4 of 4 |
| Author: | Pecka [ Sun Oct 24, 2021 6:12 am ] |
| Post subject: | Re: My H1A and H1B |
I think we have sorted things (regarding the electrics) out now. The fuse blew because of broken insulation on the cables in the rear wiring loom going to the tail light. The charging didn't work due to a broken wire going from the rectifier. |
|
| Author: | Pecka [ Mon Oct 25, 2021 7:28 am ] |
| Post subject: | Re: My H1A and H1B |
Rode the bike today. When the engine is warmed up, it doesn't idle anymore. What could be the cause for this? |
|
| Author: | Jim [ Mon Oct 25, 2021 7:57 am ] |
| Post subject: | Re: My H1A and H1B |
One possibility is carb idle adjustments (air screws) set too rich. Another is wrong float level or leaking float valves. |
|
| Author: | Pecka [ Mon Oct 25, 2021 10:49 am ] |
| Post subject: | Re: My H1A and H1B |
Ok, thanks Jim, will look into that. |
|
| Author: | Pecka [ Thu Oct 28, 2021 5:49 am ] |
| Post subject: | Re: My H1A and H1B |
The petcock needs to be rebuilt because it leaks pretty badly. But gas drips on the floor so it seems the float valves are not sealing properly? |
|
| Author: | Jim [ Thu Oct 28, 2021 7:31 am ] |
| Post subject: | Re: My H1A and H1B |
Correct! |
|
| Page 4 of 4 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|