Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Mon Jan 22, 2018 1:15 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Dec 20, 2017 6:13 pm 
User avatar

Joined: Mon Jun 13, 2011 7:14 pm
Posts: 934
Location: Martinsburg, WV
I got these two sport cams a while back and been playing around with them since. Yesterday was warm, had the day off, and figured I’d stretch the ole girls legs a bit and do some film. This is my first crack at doing pic in pic and you’ll notice the splice points. Practice makes perfect I reckon. :D I took the same trip with all of them, around what I call the ‘tuning block’. :lol:

This is Marks s2a we recently collected. Got her all rejetted for my area and she’s running great. Really pulls well, but I may raise the gearing to s3 to stretch it out a bit more. :thumbup:

https://m.youtube.com/watch?v=CmW3YCdcHB4

The S3 made an appearance and was in great form. Should have mashed it more on the straights but the clutch likes to cut loose one in a while on anything over half throttle. I really like this bike with all the mods. Horsepower is not a problem with the taller gearing, even on the interstate. 8-) One day I’ll address the clutch. Might try an additional plate.

https://m.youtube.com/watch?v=8vKRE8cNF2o

The H2 didn’t get as many miles this year as I’d had liked due to tuning/intake issues, but now she’s running much smoother and stronger. Now that it’s about tuned right, next will be some additional motor work like the s3 had done. 8-)

https://m.youtube.com/watch?v=ESvqa86x1eo

_________________
74 H2B with reeds and 34mm carbs
75 S3A Ram Air with reeds and 30mm carbs
73 S2A (wife's bike, may keep this one as is)
71 Yammi RT1B
83 HD Sportster
03 Yammi R1


Top
 Profile  
 
PostPosted: Wed Dec 20, 2017 8:40 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 9860
Location: Rio Rancho, New Mexico
Nice! :thumbup: We don't get near enough videos here........

_________________
I can teach your triple how to "reed"........
http://kawatriple.com/aylor


Top
 Profile  
 
PostPosted: Thu Dec 21, 2017 12:13 am 

Joined: Sat Oct 04, 2014 3:45 am
Posts: 670
Location: Cen Tex
The H2 sounds great! Makes me want to get mine out...

_________________
H2B..... H1E..... Z1B ..... S2 project..... RD350...... X6 Hustler..... TS250.... CB750 ..... CB550......


Top
 Profile  
 
PostPosted: Thu Dec 21, 2017 6:47 pm 
User avatar

Joined: Mon Jun 13, 2011 7:14 pm
Posts: 934
Location: Martinsburg, WV
Thanks. 8-) It was nice to swing all of them around the block. By Jan 1st, you can hang it up, next possible ride won't be till March sometime. :thumbdown: All three ran well that day and I was feening for a spritely ride. :lol:

These aare 4k cameraas but my laptop doesnt have enough power to work with them. These were done in 1080p/30 and turned out well. I'd like to get a couple more for some other vantage points. The children are getting me better mounts for Christmas. 8-)

_________________
74 H2B with reeds and 34mm carbs
75 S3A Ram Air with reeds and 30mm carbs
73 S2A (wife's bike, may keep this one as is)
71 Yammi RT1B
83 HD Sportster
03 Yammi R1


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group