| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| kh400 wheels http://kawi2strokes.com/forum/viewtopic.php?f=2&t=509 |
Page 1 of 1 |
| Author: | two-stroke-brit [ Fri Jul 08, 2011 12:13 pm ] |
| Post subject: | kh400 wheels |
are the 1976 kh400 wheels interchangeable with a similar age h1 . axle dias and tripple tree widths. thanks mark |
|
| Author: | Ja-Moo [ Fri Jul 08, 2011 12:31 pm ] |
| Post subject: | Re: kh400 wheels |
two-stroke-brit wrote: are the 1976 kh400 wheels interchangeable with a similar age h1 . axle dias and tripple tree widths. thanks mark I "believe" the axles are a smaller diameter....... |
|
| Author: | kawi3cyl [ Fri Jul 08, 2011 1:44 pm ] |
| Post subject: | Re: kh400 wheels |
Triple tree widths may be the same, but H1 fork tubes I believe are 1-2mm larger diameter, if I'm not mistaken. Also, all the 400's came from the factory with an 18" front wheel, while the 500's always used a 19". I also thought that someone stated that the earlier 74-75 S3's had some differences in axle measurements compared to the 76-later KH400's, so it'd probably be best and hassle-free to stick with KH400 parts. 
|
|
| Author: | two-stroke-brit [ Fri Jul 08, 2011 6:53 pm ] |
| Post subject: | Re: kh400 wheels |
thanks for the advise guys |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|