Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat Apr 27, 2024 7:13 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Fri Aug 17, 2012 10:07 pm 

Joined: Thu Jun 09, 2011 10:00 pm
Posts: 290
Location: Sahuarita AZ and Belgium
Any easy way to clean the stator and such other than a fine tooth comb? Trying to clean the electrical up and its quite dirty after a few years of sitting not to mention having been on the bike itself. Have a couple complete units as well as parts and want to pick through the best of it for the project bike .Thanks


Top
 Profile  
 
PostPosted: Sat Aug 18, 2012 1:59 pm 

Joined: Thu Jun 09, 2011 1:12 am
Posts: 238
Location: Queenborough U.K
take the unit to a company that rework electric motors, they will know how and what to use, one wrong move the unit will be history


Top
 Profile  
 
PostPosted: Sat Aug 18, 2012 8:29 pm 
User avatar

Joined: Fri Jun 10, 2011 3:32 am
Posts: 287
Location: Evansville, WI
It's a fairly robust piece, and doesn't really care if it's clean. Other than cleaning dust and spider webs out of it, there's not much you need to do. A stiff bristled 1" paint brush works well for that.


Top
 Profile  
 
PostPosted: Sun Aug 19, 2012 4:39 am 

Joined: Mon Jun 13, 2011 1:44 pm
Posts: 100
Location: Nottingham England
Petrol and a stiff brush, just done mine after finding 1" of water in there then finish with WD40


Top
 Profile  
 
PostPosted: Sun Aug 19, 2012 5:15 pm 
User avatar

Joined: Fri Jun 10, 2011 7:45 pm
Posts: 140
Location: São Paulo - Brazil
Like tankie said, taking the unit to experts would be the most recomended.

One of my units was looking so bad with oil and dust, that I figured the acid stuff and bacterias in there would soon eat the copper wires and decided to take the risk and did this:

Immersed the unit in a good quality refined kerosene and brushed it with a fine painting brush to remove the oil. The unit looked clean but I didn't want that oily kerosene in it, so I took the risk once again and immersed it in water with neutral detergent :eh: and brushed it gently till clean. Rinsed in water :shock: , hang it under the sun and air sprayed the unit till dry. May sound crazy but it is now clean, free of oil, bacterias and acid. Tested the unit and every reading was fine and it is fine to present. Not that I recommend anyone to do this, but in my personal opinion it is better having a clean unit, that one filled with corrosive dirt media.

_________________
75KH 500 - 74 H2 special- 74 H2B on restoration


Top
 Profile  
 
PostPosted: Sun Aug 19, 2012 6:03 pm 
User avatar

Joined: Wed Jun 08, 2011 10:12 pm
Posts: 2162
few cans of electric motor cleaner. yes, they do make the stuff, its safe for the windings.

dirt/grime = trapped heat = failure.


Top
 Profile  
 
PostPosted: Mon Aug 20, 2012 8:56 pm 

Joined: Thu Jun 09, 2011 10:00 pm
Posts: 290
Location: Sahuarita AZ and Belgium
I'll look into the electric cleaner , not so sure about the water immersion . I've got time and a spare unit so I'll give it a shot , Thanks


Top
 Profile  
 
PostPosted: Mon Aug 20, 2012 9:12 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2694
Location: Dandridge, TN, USA
Something to consider is rubbing alcohol... brush on and then rinse with it.
Kerosene will work too but leave an oily film.

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: 3ofakind


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group