| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Singh grooves? http://kawi2strokes.com/forum/viewtopic.php?f=2&t=2190 |
Page 1 of 2 |
| Author: | docrick [ Mon Jan 23, 2012 10:55 pm ] |
| Post subject: | Singh grooves? |
I have been doing reading in regards to a few other bikes that i have...i mean this is a sickness really right? How many projects are too many? lol Anyway, i came across this in my studies. this is the first i have heard of this? So with all of the squish talk on this board, i figured i would ask what ya'll think of this? RB |
|
| Author: | Bill B [ Mon Jan 23, 2012 11:30 pm ] |
| Post subject: | Re: Singh grooves? |
The jury is still out on these but its an interesting concept: http://somender-singh.com/content/view/135/49/ |
|
| Author: | Ja-Moo [ Mon Jan 23, 2012 11:35 pm ] |
| Post subject: | Re: Singh grooves? |
They "may" help on 2 valve 4 stroke heads to move the gasses into the combustion chamber. I don't see how it would help on a hemi head as they have clear flow paths. |
|
| Author: | sawracer [ Tue Jan 24, 2012 12:46 am ] |
| Post subject: | Re: Singh grooves? |
I read about this in "secrets of speed", a model a ford mag a few years ago. Is the concept gaining ground? |
|
| Author: | H2RTuner [ Tue Jan 24, 2012 3:06 pm ] |
| Post subject: | Re: Singh grooves? |
Enden was doing that stuff over in Cartoon City a decade ago, not a very good lightening attempt, even worse for performance/efficiency. |
|
| Author: | Jim [ Tue Jan 24, 2012 3:41 pm ] |
| Post subject: | Re: Singh grooves? |
Bill B wrote: The jury is still out on these but its an interesting concept: http://somender-singh.com/content/view/135/49/ Bill, If they've been around as long as they have, and the jury is still out, it seems like that really means the jury came back with their decision. |
|
| Author: | Ja-Moo [ Tue Jan 24, 2012 4:09 pm ] |
| Post subject: | Re: Singh grooves? |
Jim wrote: Bill B wrote: The jury is still out on these but its an interesting concept: http://somender-singh.com/content/view/135/49/ Bill, If they've been around as long as they have, and the jury is still out, it seems like that really means the jury came back with their decision. Jim you are not a Lawyer! 
|
|
| Author: | Japbiker [ Thu Jan 26, 2012 9:13 pm ] |
| Post subject: | Re: Singh grooves? |
Ja-Moo wrote: Jim wrote: Bill B wrote: The jury is still out on these but its an interesting concept: http://somender-singh.com/content/view/135/49/ Bill, If they've been around as long as they have, and the jury is still out, it seems like that really means the jury came back with their decision. Jim you are not a Lawyer! maybe not...but I saw a guy that looked just like him come out of a Holiday Inn Express the other morning. 
|
|
| Author: | ALTERED IMAGE [ Fri Jan 05, 2018 5:03 pm ] |
| Post subject: | Re: Singh grooves? |
g&dam%^ rat Bas)^rd stol3 my ideo 1983 fire slots with squish cliff p.s. adjust for comp loss and all good-eliminates deto |
|
| Author: | H2RTuner [ Fri Jan 05, 2018 7:36 pm ] |
| Post subject: | Re: Singh grooves? |
Enden has made a great many cylinder heads into instant junk with all that mumbo-jumbo. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|