Kawi2strokes.com Forum
http://kawi2strokes.com/forum/

If you want Wossner 400 pistons, pre-order here......
http://kawi2strokes.com/forum/viewtopic.php?f=2&t=2124		 Page 6 of 7
Author:  Jackman [ Wed Aug 15, 2012 8:23 am ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
I called Wiseco when I started my S3 project 2 years ago was told there are no pistons available for the S3.
Author:  Steve [ Thu Aug 16, 2012 8:50 am ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
Jackman wrote:
I called Wiseco when I started my S3 project 2 years ago was told there are no pistons available for the S3.


Custom build, 12 piston minimum. I'm sure those that need to know the details already know the details, they are not "cheap".

Wössner has an advantage with the value of the dollar right now......

I found my contact at Wiseco is no longer there, after a couple of decades, personal tragedy reared its ugly head.....

:(

Custom Wiseco pistons, 12 piece minimum, 6 to 8 weeks to build. Pistons ballpark about $180 to 200 each. Included rings, wrist pin and c-clips.

:think:
Author:  g6mow [ Wed Aug 22, 2012 9:11 am ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
As usual when the parts are in stock nobody is interested :banghead
Author:  simonh [ Wed Aug 22, 2012 4:04 pm ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
g6mow wrote:
As usual when the parts are in stock nobody is interested :banghead

aint that the truth



i will eventually need a set, sooner rather than later :mrgreen:
Author:  III [ Wed Aug 22, 2012 4:10 pm ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
simonh wrote:

i will eventually need a set, sooner rather than later :mrgreen:


Ditto G6, no telling how long though. ;)
Author:  Jackman [ Wed Aug 22, 2012 4:31 pm ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
motohorseman wrote:
Jackman wrote:
I called Wiseco when I started my S3 project 2 years ago was told there are no pistons available for the S3.


Custom build, 12 piston minimum. I'm sure those that need to know the details already know the details, they are not "cheap".

Wössner has an advantage with the value of the dollar right now......

I found my contact at Wiseco is no longer there, after a couple of decades, personal tragedy reared its ugly head.....

:(

Custom Wiseco pistons, 12 piece minimum, 6 to 8 weeks to build. Pistons ballpark about $180 to 200 each. Included rings, wrist pin and c-clips.

:think:



Not mentioned when I called, Wiseco could bring the price down a bit 180-200 :roll: too much for my nickle and dime budget and I bet there are many more like me can't just drop 6 bills for three pistons,,,
Author:  snorunner [ Thu Aug 23, 2012 10:56 pm ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
Where are the Wossner Pistons listed on your website I cannot find them. How much USD? and shipping? I have 2 sets of .020 over NOS Pistons I could sell if I knew how much for your Wossners.
Author:  g6mow [ Fri Aug 24, 2012 3:43 am ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
snorunner wrote:
Where are the Wossner Pistons listed on your website I cannot find them. How much USD? and shipping? I have 2 sets of .020 over NOS Pistons I could sell if I knew how much for your Wossners.

mraxl wrote:
g6mow wrote:
Location: Lancashire, England
Wed Aug 15, 2012 12:43 am
I am now stocking KH400/S3 Wossner pistons. Available in .50mm, 1mm and 1.5mm. My website will be updated soon. If you need some before then give me a shout.
http://www.kawasakitripleparts.com/
Image


My Site has not yet been updated. As stated in my earlier post, " If you need some before then give me a shout." I can be contacted through my website.

As I am in the UK I do not sell in USD.
Price is 305.00 GBP + around 12.00 GBP shipping
The pistons have been quite popular over here, I have sold quite a few sets. At the moment I only have +0.5mm and +1mm in stock.
Author:  Steve [ Tue Aug 28, 2012 8:39 am ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
g6mow wrote:
As usual when the parts are in stock nobody is interested :banghead


I wish I had a nickle for every time I wrote off inventory and then someone wanted it.

It's a strange world.....
Author:  JimH [ Mon May 13, 2013 3:32 pm ]
Post subject:  Re: If you want Wossner 400 pistons, pre-order here......
Believe it or not, after a long wait we will have all 5 sizes of 400 pistons in stock and ready to ship by Friday 5/17 here:

http://www.fastfromthepast.com/servlet/the-Pistons-cln-Kawasaki-S3-400/Categories

Thank you for your patience.
Page 6 of 7 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/