scrambler73 wrote:
if not.... are there any known bolt-on caliper "upgrades" for the later KH/KZ lowers????????
Probably the same set up as the S series?..........
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| anybody fit an EX Caliper to KH500 (or KZ) forks????? http://kawi2strokes.com/forum/viewtopic.php?f=2&t=2069 |
Page 1 of 1 |
| Author: | scrambler73 [ Tue Jan 10, 2012 8:52 pm ] |
| Post subject: | anybody fit an EX Caliper to KH500 (or KZ) forks????? |
if not.... are there any known bolt-on caliper "upgrades" for the later KH/KZ lowers???????? |
|
| Author: | Ja-Moo [ Tue Jan 10, 2012 9:18 pm ] |
| Post subject: | Re: anybody fit an EX Caliper to KH500 (or KZ) forks????? |
scrambler73 wrote: if not.... are there any known bolt-on caliper "upgrades" for the later KH/KZ lowers???????? Probably the same set up as the S series?..........
|
|
| Author: | Bradway [ Tue Jan 10, 2012 9:26 pm ] |
| Post subject: | Re: anybody fit an EX Caliper to KH500 (or KZ) forks????? |
Sorry....I can't be much help....I put an h2 front end on and did the EX upgrade..... http://i949.photobucket.com/albums/ad331/bradway_bucket/2011-03-28195435.jpg |
|
| Author: | scrambler73 [ Tue Jan 10, 2012 10:15 pm ] |
| Post subject: | Re: anybody fit an EX Caliper to KH500 (or KZ) forks????? |
Ja-Moo wrote: scrambler73 wrote: if not.... are there any known bolt-on caliper "upgrades" for the later KH/KZ lowers???????? Probably the same set up as the S series?.......... from what I understand (from a post on the old board where one of the Canadian boys made some KH400 brackets), they are different, but I do not know that for certain..... |
|
| Author: | III [ Tue Jan 10, 2012 10:24 pm ] |
| Post subject: | Re: anybody fit an EX Caliper to KH500 (or KZ) forks????? |
Hey Cody, ask Andrew (Walms) as he was the one who had some KH400 adapters made. I think I have one here somewhere that I bought from him 2-3 years ago. |
|
| Author: | Looney Cylinders [ Wed Jan 11, 2012 12:48 am ] |
| Post subject: | Re: anybody fit an EX Caliper to KH500 (or KZ) forks????? |
I suspect the 400 (with its smaller 34mm tubes) will have different disk to fork clearance than the KH500. As such, it may be only the mounting ear bolt spacing that is different from the KH to H1 (should be easy to make a H1 style (flat plate) adapter with the needed KH bolt spacing) J |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
