Now that's thinking!
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Rubber Engine mounts H1- Update- Found a Substitute! http://kawi2strokes.com/forum/viewtopic.php?f=2&t=14236 |
Page 1 of 1 |
| Author: | denisj [ Mon Aug 24, 2020 1:37 pm ] |
| Post subject: | Rubber Engine mounts H1- Update- Found a Substitute! |
Hi All! I am back to fixing another H1 and I need engine mounts again. I was digging deep last night on the forums and I found nothing available at the moment. Our German friend is currently showing that his trick upgraded rubbers are not available Any other sources? I don't want to install used rubbers. Thanks for the help! Update! Klemms writes that they used buna rubber rod in bulk. Drill and cut to fit. ...here is the part number from McMaster Carr: 86975K62 Happy Riding! |
|
| Author: | Ja-Moo [ Mon Aug 24, 2020 5:37 pm ] |
| Post subject: | Re: Rubber Engine mounts H1 |
I believe you are out of luck, sorry. The Casting company in Germany actually lost the molds... |
|
| Author: | denisj [ Mon Aug 24, 2020 6:16 pm ] |
| Post subject: | Re: Rubber Engine mounts H1 |
There's gotta be something... |
|
| Author: | denisj [ Mon Aug 24, 2020 6:45 pm ] |
| Post subject: | Re: Rubber Engine mounts H1 |
I lifted this part number from Klemms Vintage They make their own mounts from buna rubber from McMaster Carr This should work nicely. Part Number 86975K62 1"diameter Buna rubber rod 36" long |
|
| Author: | H2RTuner [ Mon Aug 24, 2020 7:44 pm ] |
| Post subject: | Re: Rubber Engine mounts H1- Update- Found a Substitute! |
I just looked on mcmaster.com, 1 inch BUNA N rubber rod (listed as "hard"), 36 inch, priced at $39.90 each. I used to live two miles north of their Norwalk Blvd., Santa Fe Springs facility, one very large city block big, they have EVERYTHING, was friends with all the people in will call. |
|
| Author: | Ja-Moo [ Tue Aug 25, 2020 8:07 am ] |
| Post subject: | Re: Rubber Engine mounts H1- Update- Found a Substitute! |
Now that's thinking!
|
|
| Author: | ThreePipesSmokin [ Fri Aug 28, 2020 4:57 pm ] |
| Post subject: | Re: Rubber Engine mounts H1- Update- Found a Substitute! |
What size hole do you need for the metal tube? They have Buna tubing with a 1" OD and 5/8" ID... McMaster #86805K54 6ft. For $7.28 you can do several engines! |
|
| Author: | DGA [ Fri Aug 28, 2020 5:51 pm ] |
| Post subject: | Re: Rubber Engine mounts H1- Update- Found a Substitute! |
Remember, rubber is still a solid, it's ability to be used for a soft mount is based on being able to displace a short distance, to somewhere. Grooves or some place for the rubber to move to works. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|