167.5 is more than an inch shorter than 195. I don't remember the ball being that big.
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Long clutch rod length 167.5? http://kawi2strokes.com/forum/viewtopic.php?f=2&t=14192 |
Page 1 of 2 |
| Author: | h2smokin [ Sun Jul 12, 2020 9:27 pm ] |
| Post subject: | Long clutch rod length 167.5? |
All the searching I have done points to this Length. Thing is all 4 of mine that I have found Are 195mm. Every size triple seems to have the same size at 167.5mm . Am I missing something. The short rod is correct at 49mm. Thanks |
|
| Author: | mraxl [ Mon Jul 13, 2020 8:44 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
13116-009 ROD CLUTCH PUSH LONG L=167.5 MM 1 Clutch H2all Ref# 10 Photo 13116-010 ROD CLUTCH PUSH SHORT L=49 MM 1 Clutch H2all Ref# 8 Photo |
|
| Author: | Ja-Moo [ Mon Jul 13, 2020 9:14 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
Hey Thom, the H2's have the steel ball in between the rods, that's why it's shorter. |
|
| Author: | Jim [ Mon Jul 13, 2020 10:08 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
167.5 is more than an inch shorter than 195. I don't remember the ball being that big.
|
|
| Author: | h2smokin [ Mon Jul 13, 2020 6:15 pm ] |
| Post subject: | Re: Long clutch rod length 167.5? |
Those are the part numbers I was using as a reference. I just pulled another motor apart and the rod in it also is 195. Can someone actually measure one for me? |
|
| Author: | ALTERED IMAGE [ Tue Jul 14, 2020 10:27 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
H1-D long 195.0 short 49 so we talkin 750 or 500? cliff |
|
| Author: | h2smokin [ Tue Jul 14, 2020 6:43 pm ] |
| Post subject: | Re: Long clutch rod length 167.5? |
My bike is a 750 altered image. Those numbers you have are the same as mine for the rods I have. |
|
| Author: | ALTERED IMAGE [ Wed Jul 15, 2020 2:37 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
Let's get history of the engines. Any mods? All 750's? 20.5mm is missing somewhere if H2's really run 167mm rods. Hyd. clutch release? cliff |
|
| Author: | mraxl [ Wed Jul 15, 2020 6:00 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
I'm thinking the parts manuals are wrong. 13116-019 is for S series and shown to be 167.5mm 13116-009 is for H series and shown to be 167.5mm I'm betting the H series should be 195mm.... that makes sense. In fact, the H1/A parts manual specifies 195mm for 13116-009. |
|
| Author: | RODH2 [ Wed Jul 15, 2020 6:47 am ] |
| Post subject: | Re: Long clutch rod length 167.5? |
Yeah, what mraxl said, I've been thinking about this, takes longer these days, but yeah!! 
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|