Kawi2strokes.com Forum

https://vintagecarleds.com/7-inch-round-headlights/

Click on products
Under 7" Round Headlights
VCm3 Series
VCm3-7" LED

I purchased this Head light for the H2's. It is a direct fit. The lights far out shins the stock light and the standard Truck bulb. It also has a nice pattern. Don't know how long they will last but I like them a lot.

You can purchase a set of two or just one. One is 109 dollars. Two is 209 dollars. You can also purchase the bulb by itself. Look for the promo code (thanks10) for 10 percent off.

Now the BULB only will also change out with the bulb in the RZ 350. Talk about a difference.

Inside bucket you will need if you don't have an H4 connector 3 prong female plug.

I have a picture of High and Low beam from the RZ that I changed just the Bulb. I could sent to someone if they want to attach it to this post.

Iron on the Bayou.

_________________
Iron On The Bayou.

Send away.

_________________
If it surges, that's normal, upshift.

I got your phone message, but I don't have an email from you.

_________________
If it surges, that's normal, upshift.

Nice - looks very close to stock (compared to my Nighthawk)

Thanks for the research, link, and your input on this.

_________________
1972 H2 750 (x2); 2003 Buell XB9S; 2008 ZZR 600

Here is the picture.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...

From Iron, new LED bulb installed in his RZ350

_________________
If it surges, that's normal, upshift.

I'm sure it will be manageable, but do you know what the draw might be? I'm sure it will be lower than the incandescent candle we currently have on H2's

Wattage

16W


Voltage

DC 7.3V – 24V Full Brightness, DC6.3V -7.2V 60% Brightness

_________________
Iron On The Bayou.

That's a nicer pattern than my Nighthawk (TruckLite).