| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| denco pipes http://kawi2strokes.com/forum/viewtopic.php?f=2&t=13653 |
Page 1 of 1 |
| Author: | gsxrtriple [ Mon Jan 14, 2019 12:04 pm ] |
| Post subject: | denco pipes |
hi all just trying to find out if denco pipes from a h2 fit a h1 I know I will probably have to relocate the rear brackets but will they fit in the exhaut outlets on the cylinders |
|
| Author: | tankie [ Mon Jan 14, 2019 12:55 pm ] |
| Post subject: | Re: denco pipes |
They will be the wrong harmonic length |
|
| Author: | Walms [ Mon Jan 14, 2019 3:36 pm ] |
| Post subject: | Re: denco pipes |
Yes they will fit with relocated rear mounts and the H2 pipes work quite well on a 500... They peak about 8-8.5k. |
|
| Author: | jyrgNorway [ Mon Jan 14, 2019 6:44 pm ] |
| Post subject: | Re: denco pipes |
I am currently working on a H1F project. Ported, 34's, toroidal heads, zeeltronic etc. I dynoed the bike using H2 Jollymoto pipes. Powerband entrance rpm, 5200 rpm. Peaks at 8200 (81rwhp) At least those H2 pipes are a good match with this H1 regarding torque and streetability. Have not posted much here last 2-3 years, so dont have a clue How to attach the Dyno sheet directly from my cell Phone. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|