Kawi2strokes.com Forum
http://kawi2strokes.com/forum/

Wisco piston rings old style 0.60 wanted
http://kawi2strokes.com/forum/viewtopic.php?f=16&t=11084		 Page 1 of 1
Author:  ironhd80 [ Thu Nov 05, 2015 3:21 am ]
Post subject:  Wisco piston rings old style 0.60 wanted
Looking for a set of wisco rings for 0.60 pistons old style rings.
Author:  RODH2 [ Thu Nov 05, 2015 5:00 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
Do you mean the L-shaped "dykes" rings? .........pretty hard to find now! :think:
Author:  Evans Ward [ Thu Nov 05, 2015 8:42 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
Do you know the old Wiseco part number? I may have some but would need that part number to know for sure.
Author:  ironhd80 [ Fri Nov 06, 2015 7:13 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
Yes they are the L shape dyke rings sorry dont have the part numbers i have a set of pistons and they are still good.
Author:  Evans Ward [ Fri Nov 06, 2015 7:26 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
I'll see what I have and report back....
Author:  P.K. [ Fri Nov 06, 2015 8:46 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
H1 or H2?

The partnumber will be as follows for 3'rd over (+0.060''):
H1 = 2421LC
H2 = 2854LC

The part number is the bore size in thousands of an inch. Divide by 1000 and multiply with 25.4 and you have the bore diameter in mm.
For example 2421/1000*25.4 = 61.5

LC = "Dykes" rings.

PK
Author:  kawi3cyl [ Fri Nov 06, 2015 10:52 am ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
Too bad Rich, I only have .020. :(
Image
Author:  Evans Ward [ Fri Nov 06, 2015 12:15 pm ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
Here's what I have- what does the R denote?
Attachment:
image.jpeg
Author:  ironhd80 [ Sat Nov 07, 2015 10:55 pm ]
Post subject:  Re: Wisco piston rings old style 0.60 wanted
I love this site you guys are the best thank you very much one set has the right numbers but has a R after the number ? Not sure what size no lc after the number
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/