I expected your silencers to be machined from titanium bar stock. You getting lazy on us Carlos?
(kidding; we know you'll make your own carbon fiber units from scratch)
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Silencers sources? http://kawi2strokes.com/forum/viewtopic.php?f=16&t=1012 |
Page 3 of 3 |
| Author: | Carlos [ Sat Sep 10, 2011 3:34 pm ] |
| Post subject: | Re: Silencers sources? |
oxford wrote: Carlos, have you made some changes to the walms pipes. I thought he had them designed so that all of the seams on the cones lined up with each other? No changes like Jim said, and you first tack weld the cones and then if needed, remove some sections and realign again to fit your specific assembly. With the cones system you have the versatility to rearrange the design to your needs on a special built bike. |
|
| Author: | oxford [ Sat Sep 10, 2011 3:52 pm ] |
| Post subject: | Re: Silencers sources? |
Jim wrote: I don't mean to speak for Carlos or Walms, but they don't all line up on WTF pipes. Some seams line up with laser cut notches. A clear set of drawings is supplied to help with assembly. Good to know. |
|
| Author: | Jim C [ Sat Sep 10, 2011 4:32 pm ] |
| Post subject: | Re: Silencers sources? |
I expected your silencers to be machined from titanium bar stock. You getting lazy on us Carlos? (kidding; we know you'll make your own carbon fiber units from scratch) |
|
| Author: | Carlos [ Sat Sep 10, 2011 7:05 pm ] |
| Post subject: | Re: Silencers sources? |
Yes Jim C, I'm getting lazy lately, but maybe the engine exhaust flanges will come out in modest billet 304ss. I've been working on the drawings this week. Ti is getting too expensive... 
|
|
| Author: | oxford [ Wed Oct 19, 2011 4:30 pm ] |
| Post subject: | Re: Silencers sources? |
Anyone know what the OD of the Mfactory silencers are? |
|
| Author: | Jim [ Wed Oct 19, 2011 4:45 pm ] |
| Post subject: | Re: Silencers sources? |
oxford wrote: Anyone know what the OD of the Mfactory silencers are? 62mm ≃ 2-7/16" |
|
| Author: | oxford [ Wed Oct 19, 2011 5:14 pm ] |
| Post subject: | Re: Silencers sources? |
Thanks. |
|
| Author: | saint barry [ Fri Oct 21, 2011 12:58 pm ] |
| Post subject: | Re: Silencers sources? |
Jim,those H1 pipes look great !!!!!!!! Have you done like that for an H2 yet ??????? Also any pictures of the pipes on Mikes bike ????? Great work !!!!!!!!!!!! Carlos,looking forward to seeing Walms pipes on your bike !!!!!!!!!! |
|
| Author: | Jim [ Fri Oct 21, 2011 2:19 pm ] |
| Post subject: | Re: Silencers sources? |
saint barry wrote: Jim,those H1 pipes look great !!!!!!!! Have you done like that for an H2 yet ??????? Also any pictures of the pipes on Mikes bike ????? Great work !!!!!!!!!!!! Carlos,looking forward to seeing Walms pipes on your bike !!!!!!!!!! Thanks Barry, Mike posted the photos with his collection, but he didn't buy the pipes. Mark D. got that set when we were at DG last spring. I have not made them for an H2 yet, but it's not a problem to do. I can install MFW silencers on any of the Denco reproduction chambers, and am a dealer for MFW. |
|
| Author: | saint barry [ Fri Oct 21, 2011 3:21 pm ] |
| Post subject: | Re: Silencers sources? |
Thanks Jim,I'll keep that in mind,they sure look good !!!! I bet they would look great on a S3 also !!!!!! 
|
|
| Page 3 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|