Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat May 18, 2024 7:24 pm

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 18 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
LIRUSS
 Post subject: s3 crank
PostPosted: Mon May 18, 2015 9:01 am 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
are the S1 & S2 cranks the exact same as a S3 ? I need a crank for my s3 & have a 73 s2 motor & can pull the crank out of but don't want to waste the time if they aren't the same ...thanks
Top
 Profile  
 
mraxl
 Post subject: Re: s3 crank
PostPosted: Mon May 18, 2015 9:09 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2695
Location: Dandridge, TN, USA
S2A & S3 are the same

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
LIRUSS
 Post subject: Re: s3 crank
PostPosted: Mon May 18, 2015 10:18 am 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
awesome , thanks !!!!! :thumbup:
Top
 Profile  
 
LIRUSS
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 8:28 am 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
hey Dale, is a S1 250 crank also the same ?
Top
 Profile  
 
mraxl
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 8:35 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2695
Location: Dandridge, TN, USA
LIRUSS wrote:
hey Dale, is a S1 250 crank also the same ?
Not all of them... some were 4 bearing.

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
LIRUSS
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 9:57 am 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
thanks again !
Top
 Profile  
 
LIRUSS
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 10:14 am 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
the s3 cranks are 4 bearing , so if i find a s1 crank with 4 bearings it will work in my s3 ?
Top
 Profile  
 
mraxl
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 10:46 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2695
Location: Dandridge, TN, USA
no, no, no.... Look at bottom of page: http://3cyl.com/mraxl/partid/cranks/crankshafts.htm

_________________
Answers are here: http://kawatriple.com/
Top
 Profile  
 
Ja-Moo
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 11:29 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
I think only the very early 350s had the 4 bearing cranks, all the later S cranks were 6 bearing......

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
LIRUSS
 Post subject: Re: s3 crank
PostPosted: Tue May 19, 2015 12:49 pm 

Joined: Mon Jan 16, 2012 11:49 am
Posts: 208
Location: L.ong I.sland NY
ok, got it ! thanks guys !
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 18 posts ]  Go to page 1, 2  Next

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group