Kawi2strokes.com Forum

Anybody know the difference between stators 21076-016 for H1E-F and 21076-022 for KH500? Have seen several references stating stator is the same for H1E,F and KH500.

Thanx, Rusty34

_________________
Tried firing every stroke and every other stroke, every stroke is better.

3 H2's, all stock
Seats by Tony O'Connor, they're gorgeous
H2B, converted to H2C
75 Paint & Decals by Brian H
75 Euro Seat by Tony O'Connor
Eldorado Motorcycle Seats, Australia

According to the Zedders software, it looks like the -022 part works for all after 73 H1 models.
But the -016 part shows only for the E and F models.
Not too sure what the difference are?

Part part number = 21076-016
Part Description = YOKE ASSEMBLY
Model Count = 2
H1E 74 500 H1 MACH III STREET
H1F 75 500 H1 MACH III STREET

Part part number = 21076-022
Part Description = YOKE ASSEMBLY
Model Count = 4
H1D 73 500 H1 MACH III STREET
H1E 74 500 H1 MACH III STREET
H1F 75 500 H1 MACH III STREET
KH500-A8 76 500 KH500 STREET

Yet the KIC software shows the two part numbers for different models?

_________________
Bad decisions make the best stories.

I believe the difference is in cable length.

_________________
Answers are here: http://kawatriple.com/

Many thanks mraxl!!

_________________
Tried firing every stroke and every other stroke, every stroke is better.

3 H2's, all stock
Seats by Tony O'Connor, they're gorgeous
H2B, converted to H2C
75 Paint & Decals by Brian H
75 Euro Seat by Tony O'Connor
Eldorado Motorcycle Seats, Australia

del

73's had the 3 pick up H2 type iggy.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........