https://www.z-power.co.uk/handle-bars-high-h1-500
https://www.diablocycle.com/Kawasaki-H2 ... ebars.html
https://z1parts.net/z1-900-kz900-handle-bar/
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| H2 Handlebars http://kawi2strokes.com/forum/viewtopic.php?f=13&t=14468 |
Page 1 of 2 |
| Author: | Yeddy911 [ Sun May 16, 2021 10:40 am ] |
| Post subject: | H2 Handlebars |
I'm looking for advice on a decent set of handlebars for my '72 H2. I don't have originals to get any measurements from. Use is for general street riding, no low style bars. |
|
| Author: | Zambia [ Sun May 16, 2021 7:51 pm ] |
| Post subject: | Re: H2 Handlebars |
I like super bike bars - 2" rise and a bit of pull back - definitely not drag bars. The good thing is you can get them for about $25 so no great risk if you find them uncomfortable. |
|
| Author: | kawi3cyl [ Sun May 16, 2021 8:52 pm ] |
| Post subject: | Re: H2 Handlebars |
https://www.z-power.co.uk/handle-bars-high-h1-500 https://www.diablocycle.com/Kawasaki-H2 ... ebars.html https://z1parts.net/z1-900-kz900-handle-bar/
|
|
| Author: | Yeddy911 [ Thu May 20, 2021 7:34 am ] |
| Post subject: | Re: H2 Handlebars |
Thanks for the post. Diablo Cycles are out of stock, and the Z Power are too much with shipping. Are the Z1 KZ 900 bars close to original dimensions? Does anyone have the original bars diameter, width, rise, and pullback? I have used clubman and superbike bars in the past when I raced my GT380 and GS1100, but I would like to have a set that looks closer to original. |
|
| Author: | Yeddy911 [ Fri Jul 02, 2021 5:11 pm ] |
| Post subject: | Re: H2 Handlebars |
Diablo had the replica's back in stock, and I am happy with the quality. Thanks for the replies, and Happy 4th to all. |
|
| Author: | Stev-o [ Thu Jul 08, 2021 11:11 am ] |
| Post subject: | Re: H2 Handlebars |
Yeddy911 wrote: Are the Z1 KZ 900 bars close to original dimensions? Does anyone have the original bars diameter, width, rise, and pullback? I have 4" rise on my H2B and like them, not sure if they are original? My original-style bars on the Z1 have 6" rise, too high for the H2 IMO. https://z1parts.net/z1-900-kz900-handle-bar/ BTW - Kawasaki put two different bars on the H2 |
|
| Author: | Yeddy911 [ Thu Jul 08, 2021 4:57 pm ] |
| Post subject: | Re: H2 Handlebars |
It seems you are right, H2/A #46003-025, H2 B/C #46003-032. I wonder what the difference is. Diablo lists their replicas for all H2 models. Height: 18cm, Width: 77cm. No pullback dimension. So that's around 7" by 30 1/3". |
|
| Author: | Stev-o [ Thu Jul 08, 2021 5:57 pm ] |
| Post subject: | Re: H2 Handlebars |
Yeddy911 wrote: It seems you are right, H2/A #46003-025, H2 B/C #46003-032. I wonder what the difference is. Diablo lists their replicas for all H2 models. Height: 18cm, Width: 77cm. No pullback dimension. So that's around 7" by 30 1/3". I can't confirm that is correct, 7" rise seems too high. May I suggest these, they are for a [GASP] CB750! https://4into1.com/chrome-handlebars-53 ... 1969-1971/ Good thing about bars is they are relatively cheap and easy to change out. Good luck |
|
| Author: | Yeddy911 [ Thu Jul 08, 2021 6:26 pm ] |
| Post subject: | Re: H2 Handlebars |
I'll have to measure the Diablo handlebars to see if their description is accurate. They did not seem to be too high when I received them, but I don't have them at home to measure right now. |
|
| Author: | ThreePipesSmokin [ Sun Jul 11, 2021 8:43 am ] |
| Post subject: | Re: H2 Handlebars |
The difference may be that the earlier ones are weighted... |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|