Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Oct 31, 2024 11:39 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Wed Sep 10, 2014 12:00 pm 

Joined: Wed Oct 17, 2012 4:26 pm
Posts: 3
Location: Calgary, Canada
Hello everyone,

New to posting on the forum and looking to start a build here shortly. I am still trying to source parts (literally have nothing) and had a couple questions...
Have a line on a 73 S2 bare frame. What are these things worth today?
Are the motors interchangeable between frames (S series)? Can the bottom end and transmission it between any of the S series bikes?

If there are some likes to information I would love to see them as well. ready to get learning and building!


Top
 Profile  
 
PostPosted: Wed Sep 10, 2014 12:03 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9928
Location: North Central NC
Welcome to the forum, Evan. I'll let the S guys answer your specific questions, but as far as information, mraxl maintains the largest collection of triples information in the world here: http://www.kawtriple.com/mraxl We call it the resource site.

When you get a minute, you should put at least an approximate location in your user profile.

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
PostPosted: Wed Sep 10, 2014 12:22 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2710
Location: Dandridge, TN, USA
All S series have identical engine mounting/transmission. 400's have rubber mounts.

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
PostPosted: Wed Sep 10, 2014 2:10 pm 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1568
Location: Tampa Bay Florida
The 72 & 73 S1 & S2 have a different lower engine mount location than all other (later) S & small KH triples. If you find an S2 motor, you are good to go, If you plan to use a later 250 ( :roll: ) or 400 you will have to move the lower mounts. I was unaware of this until I stumbled onto this thread on the KH & S forum (you may want to join there too, the "little ones" are their specialty) :thumbup:
http://kawasakikhregister.myfastforum.org/about7761.html&highlight=

And Welcome! :wave:

_________________
We don't need no stinkin' Cams!


Top
 Profile  
 
PostPosted: Wed Sep 10, 2014 3:33 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2710
Location: Dandridge, TN, USA
Thanks for posting.... a new learning :thumbup:

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
PostPosted: Thu Sep 11, 2014 1:20 pm 

Joined: Wed Oct 17, 2012 4:26 pm
Posts: 3
Location: Calgary, Canada
Excellent! Thank you for the starting place. I am up in Calgary Canada and will add it to my profile! Time to start reading.


Top
 Profile  
 
PostPosted: Thu Sep 11, 2014 1:30 pm 
User avatar

Joined: Thu Jun 09, 2011 9:12 pm
Posts: 1902
Location: Rockville, MD USA
Evan
My suggestion is NOT to start with a frame as acquiring all the parts will be expensive these days.
Buying a a nice running bike followed by buying a restored bike is the best deal IMO.

If you want to do the build for the sake of doing it yourself, I would suggest finding a complete triple that doesn't run and restore it.
There was a time that you could build it cheaper than buying it (assuming you had zero parts to start with) but those days are over.

Barrett / Jackson auctions are a great illustration of guys getting back pennies on the dollar.

_________________
There are only two types of motor sport racing:
Nitro and everything else
(Sometimes referred to as fast and slow)


Top
 Profile  
 
PostPosted: Thu Sep 11, 2014 1:37 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9928
Location: North Central NC
evan_calgary wrote:
Excellent! Thank you for the starting place. I am up in Calgary Canada and will add it to my profile! Time to start reading.

Evan, we're glad you're here, but in case you don't already, it might help you to know about the Canadian triples board too, especially when you're trying to by a triple or triple parts.

http://triplescanada.proboards.com

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
PostPosted: Thu Sep 11, 2014 2:01 pm 
User avatar

Joined: Wed Jun 08, 2011 10:41 pm
Posts: 3489
Location: Mount Vision, NY
Thanks Jim, I was about to clue him in on the Canuck board.
We have some fellas out West that post there as well.
Welcome to the triples world Evan, and best of luck with your build.

_________________
Bad decisions make the best stories.



Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group