Me too but I'm sure Mark saw our replies. Very good discussion there on this good topic. Thanks for asking this question there Bro Iron!
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| Lets Talk Flat Spot 26MM Stock Carbs http://kawi2strokes.com/forum/viewtopic.php?f=11&t=771 |
Page 1 of 1 |
| Author: | Iron [ Mon Aug 08, 2011 7:07 pm ] |
| Post subject: | Lets Talk Flat Spot 26MM Stock Carbs |
1984 US Model RZ350 or the like. I would think this has beed discussed before. It appears some have this problem and some don't. Never the less it is a problem. Everything I try doesn't seem to make it go away totally. I also feel the atmospheric conditions have a big play in the Stumble/Flat spot. I am down south with high Temps and high Dew points and Sea level. In order to correct this I must understand a couple of things. 1. What part of the Carb circuit do we feel is causing this? 2. Do most think it is a Lean or Rich condition? 3. Could this be a condition of the Carbs being out of Sync? 4. Does a fouled Needle Jet/Emulsion Tube have and effect? I am looking to learn from this post and possibly help others. Thanks Iron. |
|
| Author: | evansje1 [ Tue Aug 09, 2011 2:36 pm ] |
| Post subject: | Re: Lets Talk Flat Spot 26MM Stock Carbs |
Mark I responded over on the RD/RZ board 2 u. |
|
| Author: | Evans Ward [ Tue Aug 09, 2011 3:36 pm ] |
| Post subject: | Re: Lets Talk Flat Spot 26MM Stock Carbs |
Me too but I'm sure Mark saw our replies. Very good discussion there on this good topic. Thanks for asking this question there Bro Iron!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|