The high temp today was 69 degrees. I took advantage of the break from winter and prepped the FPPs for the application of Wal-Mart's best Rustoleum high- temp satin bbq paint. They turned out pretty good.
| Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
| 2019 Ice dent removal challenge successful http://kawi2strokes.com/forum/viewtopic.php?f=11&t=13669 |
Page 2 of 2 |
| Author: | Jim [ Mon Jan 28, 2019 9:39 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Agreed, Tim is the guy to talk to when I need to try it. |
|
| Author: | Tim Steele [ Tue Jan 29, 2019 12:53 am ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Thanks guys!!! |
|
| Author: | mraxl [ Tue Jan 29, 2019 6:33 am ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
An alternative is to use dry ice. Results vary depending on metal thickness. Won't work well with OEM mufflers. |
|
| Author: | H-nube [ Wed Jan 30, 2019 8:14 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
I have also done this. I left the stinger end uncapped. It worked pretty good. Split one pipe but I think some of the metal was thinned out from grinding the street too much. Easy fix with the welder. |
|
| Author: | Tim Steele [ Tue Feb 05, 2019 3:09 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
The high temp today was 69 degrees. I took advantage of the break from winter and prepped the FPPs for the application of Wal-Mart's best Rustoleum high- temp satin bbq paint. They turned out pretty good. |
|
| Author: | Jim [ Tue Feb 05, 2019 10:30 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Them'r some bad-ass looking pipes. |
|
| Author: | Tim Steele [ Wed Feb 06, 2019 12:12 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
I really like them on the RZ. Not so much on a Triple. The Denco is a much better Triple Chamber. |
|
| Author: | Tim Steele [ Tue Feb 12, 2019 7:03 pm ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Pipes re-installed. Packing courtesy of MP Iron Brady augmented with Lowe's finest aluminium insulation tape. Safety wire wrap will follow and then the cans. 
|
|
| Author: | Iron [ Sat Feb 23, 2019 11:07 am ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Hey Tim, how did that insulation work out for you? |
|
| Author: | Tim Steele [ Sat Feb 23, 2019 11:17 am ] |
| Post subject: | Re: 2019 Ice dent removal challenge successful |
Hey Ol Podnah. It works great. 2nd time I have used it. I still have enough left for one more repack on the RZ. Thanks again!! 
|
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|