Kawi2strokes.com Forum http://kawi2strokes.com/forum/ |
|
RZ 350 Brake upgrade question http://kawi2strokes.com/forum/viewtopic.php?f=11&t=11849 |
Page 4 of 4 |
Author: | Tim Steele [ Wed Jun 29, 2016 2:28 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
Thanks Jim! |
Author: | H2RTuner [ Wed Jun 29, 2016 5:42 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
Nice bike, and fantastic work, Tim. I like a bike that has usable brakes, and I don't subscribe to the "one is enough" mind set, I LIKE BIG BRAKES, ones set up to work the right way, not lock the front wheel up with a single finger pull. that setup looks just right for that size bike. I can't see that well, did you add one of those calipers to the rear brake? Looks like the stock RZ one. Of course, I never use the rear brake unless it is dire staits, but nice to know it was there, as well. |
Author: | Tim Steele [ Wed Jun 29, 2016 7:16 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
Stock RZ on the rear... I don't use much rear brake either...thanks!! |
Author: | Tim Steele [ Wed Jul 06, 2016 6:11 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
post img NOS aftermarket lever installed. There was a slight clearance issue at the brake lite switch, solved with a cut off vacuum plug. |
Author: | m in sc [ Mon Sep 19, 2016 2:45 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
just saw this close up. id suggest heat shrink insulating the bare plugs on the switch. if the hot one happens to come loose it will short and blow a fuse quick. + will look a lot better. just my .02 |
Author: | Tim Steele [ Mon Sep 19, 2016 10:59 pm ] |
Post subject: | Re: RZ 350 Brake upgrade question |
OK will do and thanks.... |
Page 4 of 4 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |