Kawi2strokes.com Forum
http://kawi2strokes.com/forum/

Project RZ 350 and so it begins
http://kawi2strokes.com/forum/viewtopic.php?f=11&t=10886		 Page 4 of 12
Author:  Tim Steele [ Wed Oct 14, 2015 4:52 pm ]
Post subject:  Re: Project RZ 350 and so it begins
Image

My $ 5.29 shipped EBay's finest Chinese RZ manual petcock arrived today. RZ started 1st kick cold 3rd time in a row 8-) 8-)
I gotta get me some brakes fixed and some tires ordered too...

Ordered some fork seals and a set of RD oil nozzles in case I decide to go with 28 round slide RD carbs at some point... Thanks John at Economy Cycle!!!
Author:  two-stroke-brit [ Wed Oct 14, 2015 5:29 pm ]
Post subject:  Re: Project RZ 350 and so it begins
the avon roadriders or the BT45 are the two most popular choices for the RZ350.
there are others of coarse.
just FYI.
cheers mark
Author:  Tim Steele [ Wed Oct 14, 2015 6:44 pm ]
Post subject:  Re: Project RZ 350 and so it begins
I am gonna try the Avons this time. I really liked them on Mark's RZ..
Author:  Jim [ Wed Oct 14, 2015 6:56 pm ]
Post subject:  Re: Project RZ 350 and so it begins
I don't think you can go wrong with Roadriders, Tim. That's what's on my little DT100.
Author:  Tim Steele [ Sun Oct 18, 2015 12:39 am ]
Post subject:  Re: Project RZ 350 and so it begins
Image

Farm work took most of the weekend and some long overdue honey do list crap...but I did manage to get the fairing off so I can lube the tach cable and prep to pull the front end off for the fork seal and progressive suspension springs.
I kinda like it nekid....
Author:  Tim Steele [ Tue Oct 20, 2015 6:19 pm ]
Post subject:  Re: Project RZ 350 and so it begins
Progressive suspsension fork springs ordered today from John at Economy...
Author:  Tim Steele [ Sat Oct 24, 2015 1:00 pm ]
Post subject:  Re: Project RZ 350 and so it begins
Goodie box from Economy arrived but a flat tire on the feed truck that I just paid last week to have fixed... :e4 :e4 :e4 :e4 :e4 :e4 :e4 :e4 :e4 It's going ( BACK TO THE TIRE PLACE) after a morning and early afternoon of hauling hay has prevented me from working on bikes :banghead :banghead :banghead
Progressive Springs and new seal are here, just no time. I will fit in a Manly Triple Ride or a Girly Bike Excursion later after tire repair.
Author:  Tim Steele [ Sun Oct 25, 2015 8:43 pm ]
Post subject:  Re: Project RZ 350 and so it begins
Parts gathering continues. I just snagged a set of Spec II prepped 30 MM roundslides from my friend A1R John on ebay. He is making me a custom throttle cable with oil pump cable. The carbs already have oil nozzles and a place for vacuum even though I am losing the stock petcock.... forgot to order the new fork boots when I ordered the new springs and seals so I will be ordering them tomorrow... 8-) 8-)
I plan to pull the infernal EPA bridged stock carbs only 1 more time and bolt on the 30s... :D :D
Author:  BarryB [ Sun Oct 25, 2015 8:53 pm ]
Post subject:  Re: Project RZ 350 and so it begins
This thread is bookmarked so I can re-read all the goodies Tim is having fun with!!!!!! :clap: :clap: :clap:
Author:  Tim Steele [ Wed Oct 28, 2015 3:21 pm ]
Post subject:  Re: Project RZ 350 and so it begins
Got my new dust boots today and a set of superbike grips from Economy Cycle Thanks John!!!
Ordered a set of Avon AM26 Road Riders from Bike Bandit $174.90 shipped. :D :D :D
Down with the flu, had to call off work. Just got out of bed feel like ass
Page 4 of 12 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/